Лучшие моды на графику для the elder scrolls v: skyrim special & legendary edition

Режим выживания (и кемпинг)

Два самых популярных мода в Creation Club идеально подходят друг другу. Режим выживания полностью меняет то, как игроки проходят через игру, добавляя такие факторы, как голод, усталость, способ регенерации ресурсов, устранение быстрых путешествий и воздействия окружающей среды на благополучие игрока, такие как холод и тепло.

Кемпинг идет рука об руку с режимом выживания, предлагая игрокам способ преодолеть это в дебрях, не перегружая себя количеством вещей, которые необходимо поддерживать. Принадлежности для кемпинга могут быть созданы в кузнице, и игроки получают базовое представление о системе после размещения своего первого лагеря.

Возвращение серого клобука

Серый Лис был центральной фигурой Воров Задания гильдии в The Elder Scrolls IV: Oblivion. Серый Клобук — это не просто средство прикрыть лицо, это на самом деле даэдрический артефакт, который был украден не кем иным, как даэдрическим принцем Ноктюрнал — таким образом, Капюшон стал ассоциироваться с легендарными ворами.

Серый капюшон украшен даэдрическим письмом на носу, которое гласит: «Тень скрывает тебя», отсылку к его первоначальному владельцу. В Skyrim этот предмет дает своему владельцу эффект «Обнаружение жизни» и является единственным предметом во всей игре, который предоставляет этот бонус пассивно.

Requirements

Ultra tree LOD requires tree LOD billboards generated by TexGen. In case 3D tree LOD is desired, 3D tree LOD models need to be installed in the load order. If a 3D LOD model is not available for a tree, the tree LOD billboard will be used automatically in its place. Use TexGen to generate all required tree LOD billboards. Consider generating HD Tree LOD billboards with normal map textures for better looking tree LOD that reacts more naturally to lighting than standard tree LOD.

DynDOLOD Resources ships with 3D tree LOD models for the vanilla trees of Skyrim, Skyrim Special Edition and Skyrim VR and a few select mods:

• Vanilla trees for Skyrim, Skyrim Special Edition and Skyrim VR.
• Realistic Aspen Trees 4k 2k 1k — Mod only available through alternative sources now. They are available as install option in Enhanced Vanilla Trees, though.
• Realistic Aspen Trees SE
• Enhanced Landscapes Oaks Standalone — newer versions now also include 3D tree LOD assets in the mods archives.
• Reach Tree Reborn
• Simply Bigger Trees SE — (formerly SkySight SBT) — Vanilla trees only. Courtesy of FiftyTifty.
• Static Mesh Improvement Mod — SMIM — Updates a vanilla tree.

Below is a list of mods that are known and tested to contain hybrid trees. Read their description for information which versions, trees or install options contain dedicated/optimized 3D LOD models. Install hybrid trees assets according to their documentation. Let TexGen generate all required tree LOD billboards. It is recommended to not install any legacy billboards. In case legacy billboards are included in a mods download it is recommended to hide/remove them.

• Aspens Ablaze — There is no need to rename 3D tree LOD model files. DynDOLOD automatically falls back to the standard object LOD filename convention.
• Aspens Ablaze Add-On — DynDOLOD 3 for Aspens Ablaze
• Bent Pines II
• DynDOLOD Ultra Trees — provides 3D tree LOD models for a growing list of tree mods.
• DynDOLOD Ultra Trees for CG4 Trees and Bushes SE
• Enhanced Vanilla Trees — in case of using the Skyrim version with Skyrim Special Edition, install the mod as usual and then only convert the plugin with Creation Kit 64. Do not convert any of the NIF models.
• Enhanced Vanilla Trees SE — the Skyrim SE version is updated by TechAngel85 and z929669 to better support 3D tree LOD.
• Enhanced Landscapes Oaks Standalone
• Enhanced Landscapes — Oaks Standalone SSE — Marsh Pines — Dilon Vul — Optional install Enhanced Landscapes — Dilon Vul — DynDOLOD 3D Hybrids
• Green and Lush Aspen Trees SE
• Happy Little Trees (formerly known as A little tree mod WIP) — Install 3D tree LOD models from Happy Little Trees Add-On — DynDOLOD 3.
• Lush Vanilla Trees
• Myrkvior — The Flora Of Skyrim — Trees
• Myrkvior — The Flora Of Skyrim — Trees SSE — Optional install Myrkvior — TFoS Add-On — 3D Hybrid Trees SSE — DynDOLOD
• Morekvior — Myrkvior Visual Enhancement — Install Morekvior-Myrkvior Visual Enhancement-DynDOLOD
• Reach Tree Replacer SSE
• Skyrim 3D Trees and Plants — Install Skyrim3DTrees and Plants 3dLOD Resources. There is no need to rename 3D tree LOD model files. DynDOLOD automatically falls back to the standard object LOD filename convention.
• Skyrim Flora Overhaul — 2.5b
• Solstheim Genesis
• Tamriel Reloaded Trees Refined plus patches
• Trees Addon SE

When converting Skyrim tree mods to work with Skyrim Special Edition, typically do not convert the full tree models, as that will change their CRC32 checksum which is used to match the 3D tree LOD models. If full models have been converted, update the CRC32 in the 3D tree LOD filename so they match again.

Броня и одежда

Несколько крупных сборников модов на переработку внешнего вида доспехов и одежды. Можно ставить все моды из этой категории — в худшем случае, одни реплейсеры перезапишут другие.

aMidianBorn Book of Silence

Огромный сборник высококачественных текстур для оружия, брони и существ.

Версия для Special Edition существует лишь в виде пользовательской адаптации без моделей. Работать должно, но если будут проблемы — используйте моды, представленные ниже.

Скачать (LE)
Скачать (SE)

Улучшает модели и текстуры тех предметов, до которых не дотянулись руки автора Book of Silence.

Скачать

Текстуры высокого разрешения для всей одежды в Skyrim и всех трёх официальных дополнений.

Скачать

Улучшенные текстуры железной брони.

Скачать

Имперская броня в высоком качестве.

Скачать

Очень качественный ретекстур экипировки из драконьей чешуи и костей.

Скачать

Улучшает броню Стражи Рассвета из дополнения Dawnguard.

Скачать

HD текстуры брони Гильдии Воров.

Скачать

Улучшенные текстуры брони Тёмного Братства.

Скачать

Internal Billboards and External Billboards

By default using billboards in object LOD use the same 2 plane cross intersecting at a 90 degree angle very similar to the traditional tree LOD. This internal billboard supports normal maps and different lighting options which are explained in the Billboards Brightness section below.

It is also possible to define external billboard models in ..\DynDOLOD\Edit Scripts\DynDOLOD\DynDOLOD_.ini with the settings:

In order to use a different billboard, update the tree mesh mask rule and set the desired Billboard2, Billboard3, Billboard4 etc. for LOD Level 4, LOD Level 8 or LOD Level 16.

DynDOLOD will first look for the NIF in the ..\Data\DynDOLOD\ folder and in case none is found it will look in ..\DynDOLOD\Edit Scripts\DynDOLOD\. This way it possible for mods to simply include their own external billboard NIF models without users having to copy files.

The mesh DynDOLOD_flat_2x2_lod.nif defines the same 2 plane at 90 degrees similar to the internal billboard. The mesh DynDOLOD_flat_3x2_lod.nif has 3 planes intersecting at 60 degree angles and allows for 3 different textures.

While the internal billboard is suitable for standard tree LOD billboards and HD tree LOD billboards, consider using DynDOLOD_flat_4x2_lod.nif with HD tree LOD billboards for even better visuals. The internal billboard has 4 triangles per tree, while DynDOLOD_flat_4x2_lod.nif has 8 triangles per tree. The additional triangles allows for better reactions to light sources from all directions together with the HD tree LOD billboards. It is a good alternative to 3D tree LOD models in case performance or resource usage is of concern or as fallback for individual trees in case 3D tree LOD models are not available.

LODGen_flat_lod.nif is the same file shipping with xLODGen in case a user wants to replicate the visual results with xLODGen.

In order to use vertex colors in an external billboard NIF, at least one vertex color in a shape needs to be 0.9 or less. Otherwise if all vertex colors are «white» e.g. RGB all > 0.9 they may be removed for optimization. Note that vertex colors will be replaced by the FlatLODVertexColor or FlatLODWithNormalMapVertexColor and then changed by the FlatLODColorVariance settings unless those settings are disabled with -1 as explained below in the Billboards Brightness section.

See the existing DynDOLOD_flat_2x2_lod.nif for how vertices are defined with coordinates 0.0 and 1.0 respectively. The values will be multiplied with width, depth and height values from the billboard txt files which are automatically created by TexGen together with the billboard textures..

See the existing DynDOLOD_flat_2x2_lod.nif or DynDOLOD_flat_3x2_lod.nif for how each plane is a separate shape and defines a different texture, numbered _1, _2, _3 to be able to define different billboard textures for each plane. If only one billboard texture is found in the load order it will be used for all planes. If a _1.dds texture is found, then all textures with the same name like _2.dds, _3.dds etc. are added to the texture atlas and used for the billboard. Any billboard with the same filename but without a number indicator is ignored. Generating HD tree LOD billboards with TexGen creates a front and side view texture.

See the existing DynDOLOD_flat_2x2_lod.nif for how the NiTriShape/BSTriShape Names are used to pass instructions to LODGen by setting it to «PassThru SphereNormals».

The «PassThru» means to not modify the shader settings to the typical settings required for object LOD. So the Shader Flags and Lighting Effects are left alone for the billboard. Remember that not all shader settings are supported by LOD and certain combinations can cause CTD.

«FixedNormals» means to not rotate the normals of the shape — they behave like world normals, always pointing in the same direction regardless of the orientation of the model. Typicaly the normals of traditional tree LOD just points straight upwards 0, 0, 1 into the sky so all sides receive equal lighting. By setting «SphereNormals» LODGen is instructed to adjust the normals like they originate from a center point below the translated/rotated billboard. This will make the planes react a bit better to lighting coming from different directions, without one side going considerable darker like it is the case with the typical «face» normals.

Чародейские аксессуары (и Некромантический гримуар)

Создание Чародейских аксессуаров — один из самых популярных вариантов в Клубе Создания, благодаря его очень хорошо разработанным новым заклинаниям и разнообразию добавляемых им магических роб двойного типа. Кроме того, Гримуар Некромантии предоставляет множество подобных дополнений — хотя вместо традиционной магии он добавляет 13 новых заклинаний Некромантии и новый комплект брони для воскрешения мертвых.

Оба этих творения добавляют новый слой к магической системе Skyrim , и хотя ни одно из включенных заклинаний не является особенно разрушительным для игры, они служат меньше дорогостоящие альтернативы аналогичным заклинаниям в основной игре.

Trees on the Map

The standard tree LOD is hidden on the map, but can be made visible by turning off terrain and object LOD with tll in console for comparison.

By default the map shows object LOD from LOD level 16. Since the tree mesh mask rule defines to use a billboard for LOD Level 16, these trees show on the map together with the other objects from this LOD level.

If tree LOD is not desired on the map, either set LOD Level 16 for all tree mesh rules to None instead of Billboard. Alternatively edit Skyrim or INI and set the object LOD level for the map to 32. That turns off all object LOD on the map, since by default there is no LOD level 32 object LOD:

If no LOD level 32 object LOD files exist, the setting can cause stuck object LOD in active exterior cells or object LOD to be missing entirely. To generate LOD level 32 object LOD, set Level32=1 in ..\DynDOLOD\Edit Scripts\DynDOLOD\DynDOLOD_.ini.

If all rules for LOD Level 32 are set to None (not a single LOD model is used in LOD Level 32) for a worldspace, LODGen will generate LOD Level 32 to be like LOD Level 16, but without any billboards. If there are any models defined in LOD Level 32 for a worldspace, then LOD Level 32 will be generated for the worldspace as usual with only the specifically assigned models — just like the other LOD Levels.

Certain ENB settings like FogColorMultiplier or FogColorCurve in can affect how tree LOD looks on the map. Consider changing the default key combination to toggle on/off all ENB effects from SHIFT+F12 to the m key typically used to open the map. Open enblocal.ini in an editor and change:

Another option is to use different for the map. By default the form ID for the weather used on the map is 000A6858.

A third option is to make the static billboard trees in LOD Level 16 not react to any lighting settings. Open ..\DynDOLOD\Edit Scripts\DynDOLOD\DynDOLOD_.ini in notepad and set FlatLODLevelLODFlag=3 before generating. As a side effect the tree LOD on the map may appear a bit too dark, but at least it will not react to certain ENB settings.

Generating

By checking the Ultra checkbox on the advanced mode, the LOD for all trees can be done in object LOD while the standard tree LOD system is being disabled.

Depending on the mesh mask rules the LOD for such trees will use (hyrbid) 3D tree LOD models (if available) or use tree LOD billboards directly or as fallback in case a 3D tree LOD is not found. The default fallback is defined by the TreeFullFallBack=1 setting in ..\DynDOLOD\Edit Scripts\DynDOLOD\DynDOLOD_.ini. 1 = Billboard, 2 = Bilboard2 etc.

Depending on clicking the Low, Medium or High buttons the tree mesh mask rule is populated with different defaults.

Typically set LOD Level 4 to Level0 for 3D tree LOD. Use Billboards for all LOD levels in case performance or resource usage is of concern, but the advantages of doing trees in object LOD is desired over the limited standard tree LOD system.

While Billboard1 is suitable for standard tree LOD billboards and HD tree LOD billboards, consider using Billboard4 with HD tree LOD billboards for even better visuals. Billboard1 has 4 triangles per tree, while billboard 4 has 8 triangles per tree. The additional triangles allows for better reactions to light sources from all directions together with the HD tree LOD billboards. It is a good alternative to 3D tree LOD models in case performance or resource usage is of concern or as fallback for individual trees in case 3D tree LOD models are not available.

While the LOD is generated, a log file with a detailed report for each tree is created to ..\DynDOLOD\Logs\DynDOLOD__Tree_Report.txt. It will contain an entry for each which types of assets were found and used for the different LOD levels:

As the above example shows, a 3D LOD was found for the tree with the form ID 0006A9E6. The NIF model path and filename will be different if other tree mods are used. The messages will change depending on 3D LOD models being found and the fallback to billboards or full models.

Призраки Трибунала …

Кстати об инструментах Кагренака, Anniversary Edition позволяет игрокам узнать о том, что случилось с Трибуналом Темных Эльфов Живых Богов в десятилетия после Красного Года. Хотя Сота Сил был убит Альмалексией в Морровинде , а сама Альмалексия была убита Нереварином, никто не знает, что случилось с Вивеком — был ли он убит или просто исчез, неизвестно.

Однако аддон «Призраки трибунала» не просто добавляет сюжетную цепочку заданий. Он также добавляет столь востребованный Morrowind — тематические доспехи, оружие, персонажи и локации, а также обещание объяснить, что произошло за годы после разрушения Вварденфелла.